TROUBLESHOOTING D-LINK DWR-112

SETUP AND CONFIGURATION PROBLEMS

• HOW DO I CONFIGURE MY DWR-112 3G WI-FI ROUTER WITHOUT THE INSTALLATION CD, OR CHECK MY WIRELESS NETWORK NAME (SSID) AND WIRLESS ENCRYPTION KEY ?

• Connect your PC to the DWR-112 using an Internet cable.
• Open a web browser and enter the router address: http://192.168.0.1
• The default username is admin. The default password is blank (leave this box empty).
• If you have changed the password and cannot remember it, you will need to reset the router to   factory default in order to set the password back to blank.

• HOW DO I RESET MY DWR-112 3G WI-FI ROUTER TO FACTORY DEFAULT SETTINGS?

•  Ensure that the DWR-112 is plugged in and receiving power.
•  Press and hold the reset button on the front of the device for 5 seconds.
•  Note: Resetting the product to the factory default will erase the current configuration. To    reconfigure your setting, log into the DWR-112 as outlined in question 1, then run the Setup  Wizard.

•  HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?

• For each PC that needs to connect to the DWR-112 wirelessly, you must ensure that the correct Wireless Network Name (SSID) and encryption key has been entered.
• Use the web based user interface (as described in question 1 above) to verity or choose your wireless settings.
• Make sure you write down these setting so that you can enter them into each wirelessly connected PC. You will find a dedicated area on the back of this document to write down this important information for future use.

•   WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION ?

•   If connecting using a 3G connection, make sure that you are within range of the mobile service  provider, and that the service has been correctly configured.
•  If connecting using the WAN via ADSL / Cable service, make sure the modem has been  enabled/connected and is operational, and that the service is correctly configured.